1kv Insulation Piercing Connector

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Zhejiang

  • Validity to:

    Long-term effective

  • Last update:

    2019-07-23 13:37

  • Browse the number:

    458

Send an inquiries

Company Profile

Zhejiang Sentuo Electric Co., Ltd.

By certification [File Integrity]

Contact:wennuan(Mr.)  

Email:

Telephone:

Phone:

Area:Zhejiang

Address:Zhejiang

Website:http://www.sentuoelectric.com/ http://wennuan.road2lamp.com/

Product details

The insulation piercing clamp is mainly composed of a reinforcing shell, a puncture blade, a gasket, a waterproof silicone grease, a high-strength bolt, a torque nut and a cable end cap. When the cable needs to be branched or connected, the cable branch line terminal is inserted into the waterproof terminal. Cap sleeve, after determining the branch position of the main line, use a socket wrench to tighten the torque nut on the clamp. During the process, the contact blade will pierce the cable insulation and contact the conductor. The gasket ring is around the piercing position. The grease leaks. When the torque reaches the set value, the nut torque mechanism comes off, the main line and the branch line are turned on, and the waterproof performance and electrical effect reach the parameters required by the standard.

Type

Equivalent Type

Main Line Section
(mm2)

Branch Section
(mm2)

Norminal Current
(A)

Dimensions
(mm)

Weight (g)

Piercing Depth (mm)

Bolt
Quantity (pcs)

SL756

JJC888

0.75-6

0.75-6

41

21x27x23

10

1-1.5

1

SL101

JJC-1

1.5-25

1.5-10

55

27x41x62

55

1.5-2

1

SLEP

JJC-2

16-95

1.5-10

55

27x41x62

55

1-2

1

SL102

JJC-3(A)

6-50

4-25

157

42x45x62

110

2.5-3.5

1

SL2-95

JJC-3

16-95

4-35(50)

157

46x52x87

160

2.5-3.5

1

SL2-150

JJC-4

50-150

6-35(50)

157

46x52x87

162

2.5-3.5

1

SL3-95

JJC-5

25-95

25-95

214

50x61x100

198

3-4

1

SL3-120

JJC-5-1

16-120

16-120

214

50x61x100

198

3-4

1

SL4-150

JJC-6

(35)50-150

(35)50-150

316

50x61x100

280

3-4

1

SL6

JJC-7

120-240

25-120

276

52x68x100

360

3-4

1

SL7

JJC-7-1

150-240

10-25

102

52x68x100

336

3-4

1

SL240

JJC-8

95-240

95-240

425

83x130x130

 

1020

4-5

2

SL300


300

25-95

425

83x130x130

1040

4.5-5.5

2

95-240

SL400


400

25-95

425

83x130x130

1040

5-6

2

95-240


Installation of twin-screw insulated puncture clamp

1.Unscrew the clamp and insert the main wire into the main slot.Do not jam the main line and the tool holder.Note whether the wire diameter range corresponds to this clamp.

2.Place the branch line in the branch line slot.Note the same as above.

3.Tighten with a socket wrench.Disable the open end wrench.

4.Note that the two nuts should be screwed down in sequence.

5.When tightening to a certain strength, the constant torque nut is broken and the installation is completed.


Certificate


Product showroom

http://www.sentuoelectric.com/